System SP Tables-1
SM Appendix 4-3 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
1105* Fusing Temperature Adjustment
1 Roller Center Adjusts the fusing temperature at the
center and both ends of the hot roller for
normal printing.
[120 to 200 / 180 / 1°C/step]
2 Roller Ends
3 Energy Saver
Adjusts the fusing temperature at the
center and both ends of the hot roller for
energy saver mode.
[0 to 160 / 150 / 1°C/step]
4 Thick Paper – Roller Center Adjusts the additional fusing temperature
for thick paper for the 2nd paper tray and
for the bypass tray.
[0 to 30 / 15 / 1°C/step]
5 Thick Paper – Roller Ends
6 After Warming-up - Center
Adjusts the fusing temperature at the
center of the hot roller after the machine
has warmed up.
[120 to 200 / 180 / 1°C/step]
7 After Warming-up - Ends
Adjusts the fusing temperature at both
ends of the hot roller after the machine
has warmed up.
[120 to 200 / 185 / 1°C/step]
8
After Warming-up - No. of
Pages
In this machine, fusing temperature is kept
10°C higher than the normal temperature
for a number of pages after the machine
has warmed up. This SP selects the
number of pages made at this
temperature. See Detailed Section
Descriptions – Fusing for more details.
[0 to 10 / 3 / 1 page/step]
To Next Page
Loading...
