Ricoh D017 - Front Scanner Wire; Reinstalling the Front Scanner Wire

Scanner Unit
SM 4-14 D017/D018/D019/D020/D084/D085
4.3.7 FRONT SCANNER WIRE
1. Exposure glass ( p.4-5)
2. Front frame (
p.4-7 "Exposure Lamp")
3. Front scanner wire clamp [A]
4. Front scanner wire bracket [B] (
x 1)
5. Front scanner wire and scanner drive pulley [C] (
x 1)
Reinstalling the Front Scanner Wire
1. Position the center ball [A] in the middle of the forked holder.
2. Pass the right end (with the ball) [B] through the square hole. Pass the left end (with the
ring) [C] through the notch.
3. Wind the right end counterclockwise (shown from the machine's front) five times. Wind
the left end clockwise twice.