Installation Requirements
SM 2-2 D017/D018/D019/D020/D084/D085
2.1.3 MINIMUM SPACE REQUIREMENTS
Place the copier near the power source, and provide clearance as shown:
A: In Front: Over 750 mm (29.6"), B: Left: Over 100 mm (0.4")
C: To Rear: Over 100 mm (0.4"), D: Right: Over 100 mm (0.4")
E: 640 mm (25.2"), F: 550 mm (21.7"), G: 1137 mm (44.8")
The 750 mm recommended for the space at the front is only for pulling out the
paper tray. If an operator stands at the front of the copier, more space is required.
To Next Page
Loading...
