Fax Communication Features
SM 209 D361/D510
D361/D510
Fax Option
Type
3350/3351
Selectable Options
These options are available for selection:
With the default settings, the scan resolution can be either standard or detail. Inch-mm
conversion before TX depends on IFAX SW01 Bit 7. Detail resolution will be used if
Super Fine resolution is selected, unless Fine resolution is enabled with IFAX SW01.
The requirements for originals (document size, scan width, and memory capacity) are
the same as for G3 fax memory TX.
The default compression is TIFF-F format.
IFAX SW00: Acceptable paper widths for sending
IFAX SW09: Maximum number of attempts to the same destination
Secure Internet Transmission
SMTP Authentication:
User Tools> System Settings> File Transfer> SMTP Authentication
POP Before SMTP:
User Tools> System Settings> File Transfer> POP Before SMTP
Mail Reception
Three Types
This machine supports three types of e-mail reception:
POP3 (Post Office Protocol Ver. 3.)
IMAP4 (Internet Messaging Access Protocol)
SMTP (Simple Mail Transfer Protocol)
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC –
Internet/LAN Fax Boards – Mail Reception
POP3/IMAP4 Mail Reception Procedure
The machine automatically picks up e-mail from the server at an interval which is
adjustable in the range 2 to 1440 min. in 1-minute steps:
User Tools> System Settings> File Transfer> E-mail Reception Interval
To Next Page
Loading...
