Fax Communication Features
D361/D510 212 SM
Remaining SAF capacity error
The machine calls the server but does not receive e-mail if the remaining SAF capacity is
less than a certain value (the value depends on IFAX Switch 08. The e-mail will be received
when the SAF capacity increases (for example, after substitute reception files have been
printed). The error handling method for this type of error is the same as for "Abnormal
files".
If the capacity of the SAF memory drops to zero during reception, the machine operates in
the same way as when receiving an abnormal file (refer to "Abnormal files" above).
Secure Internet Reception
To enable password encryption and higher level security: User Tools> System Settings>
File Transfer> POP3/IMAP4 Settings> Encryption (set to "On")
Transfer Request: Request By Mail
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC –
Internet/LAN Fax Boards – Transfer Request
The fields of the e-mail and their contents are as follows:
Field Content
From E-mail address of the requesting terminal
To Destination address (Transfer Station address)
Bcc Backup mail address
Subject From TSI (Fax Message No. xxxx)
Content-Type
Multipart/mixed
Text/Plain (for a text part), image/tiff (for attached files)
Content-Transfer-Encoding Base 64, 7-Bit, 8-bit, Quoted Printable
Mail body (text part)
RELAY-ID-: xxxx (xxxx: 4 digits for an ID code)
RELAY: #01#*X#**01….
Message body MIME-converted TIFF-F.
To Next Page
Loading...
