Controller Options
SM 2-98 D017/D018/D019/D020/D084/D085
Installation
Turn off the main power switch and disconnect the power supply cord.
1. Remove the plastic application cover (
x1).
2. Remove the cover [A] of board slot (
x1).
3. Attach the interface board [B] to the controller board (
x2 knob screws).
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
4. Install the Bluetooth card [C] in the slot in the Bluetooth unit.
5. Insert the antenna [D] into the Bluetooth card.
6. Attach the antenna cap [E].
To Next Page
Loading...
