Ricoh D017 - Page 150

Controller Options
SM 2-104 D017/D018/D019/D020/D084/D085
 Exit the UP mode, and then turn off the machine.
 Remove the VM card from the SD card slot 2.
5. Remove the plastic application cover [A] (
x 1).
6. Insert the SD card in SD card [B] Slot 2 (lower).
 The encryption SD card must be installed in Slot 2 (lower).
7. Turn on the main power switch.
8. Enter the SP mode.
9. Select SP5878-002 (Option Setup – Encryption Option), and then touch [Execute].
10. Turn off the main power switch.
11. Remove the SD card.
12. Attach the slot cover [A] (
x 1).
13. Switch the machine on.