Controller Options
SM 2-128 D017/D018/D019/D020/D084/D085
The authentication data is moved with the application program to the target SD card.
Once an application has been moved from the original SD card, the original SD card
cannot be used unless the application is restored to the SD card with SP5873-2 (Undo
Execute).
SD cards must be stored in a safe location at the customer site The empty SD card
serves as proof of purchase and is the only evidence that the customer is licensed to
use the application program.
Before storing the card from which an application has been copied, label it carefully so
that you can identify it easily if you need to do the undo procedure later.
If PostScript3 is not used…
Move all applications which the customer wants onto one SD card. The destination card
should have the largest amount of space available so it can hold as many other applications
as possible.
The VM Card can be neither merged nor moved to another SD card. This card must
be installed in Slot 2 (lower).
SD Card Options SD Card Size Module Size
Printer/Scanner Unit Type 3350 32 MB 9.3 MB
RPCS Printer Unit Type 3350 32 MB 6.3 MB
Printer Unit Type 3350 32 MB 8.3 MB
Printer Enhance Option Type 3350 16 MB 4 MB
Scanner Enhance Option Type 3350 16 MB 3 MB
DataOverwriteSecurity Unit Type I 16 MB 4 MB
PostScript3 Unit Type 3350 64 MB 14.6 MB
IPDS Unit Type 3350 32 MB 13.5 MB
If PostScript3 is used…
Move all applications to the PostScript3 SD card.
To Next Page
Loading...
