Service Call Conditions
D017/D018/D019/D020/D084/D085 3-12 SM Appendix
399 B
Illegal toner bottle (South Korea only)
The installed toner bottle installed is not
intended for use with this machine.
Install the correct type of toner
bottle.
401 B Transfer roller leak error 1
A transfer roller current leak signal wad
detected. (The current feedback signal
for the transfer roller was not detected
within the correct time.)
High voltage supply board set
incorrectly or defective
Transfer roller set incorrectly
or damaged
Transfer unit set incorrectly
402 B Transfer roller leak error 2
A transfer roller current leak signal is
detected. The current feedback signal
for the transfer roller is not detected
within the correct time.
Transfer roller set incorrectly
or damaged
High voltage supply board set
incorrectly or defective
411 B Separation bias leak error
A separation bias leak signal was
detected.
High voltage supply board
defective
Discharge plate defective
490 B Toner supply motor leak error
More than 1 ampere supplied to the
toner supply motor for longer than 200
ms.
Toner supply motor defective
To Next Page
Loading...
