Ricoh D017 - Page 454

System SP Tables-2
SM Appendix 4-21 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
2906* Tailing Correction
1
Shift Value
Shifts the image across the page at the interval specified by SP2906 2.
When making many copies of an original that contains vertical lines (such as
a table), separation may not work correctly, then a tailing image will occur
(ghosts of the vertical lines will continue past the bottom of the table). This
SP prevents this problem.
[0.0 to 1.0 / 0.0 / 0.1 mm/step]
2
Interval
Changes the interval for the image shift specified by SP2906 1.
[0 to 10 / 0 / 1 page/step]
2907* Filter Setting
Adjusts the line width for the copy mode. The default setting disables this
function. A number smaller than the default makes lines thinner, a number
larger than the default makes lines thicker.
1 Text: Multilevel Copy [0 to 10 / 5 / 1 step]
2 Photo: Multilevel Copy [0 to 10 / 6 / 1 step]
3 Text/Photo: Multilevel Copy
[0 to 10 / 5 / 1 step]
4 Pale: Multilevel Copy
5 Generation: Multilevel Copy