System SP Tables-2
D017/D018/D019/D020/D084/D085 4-26 SM Appendix
2930*
TD Sensor Manual Setting
Adjusts the TD sensor output. DFU
[0 to 5 / 0.0V / 0.05V/step]
2931*
TD (V/wt%) Setting
Adjusts the TD sensor sensitivity (coefficient: S) for toner density control.
DFU
[0.01 to 1.50 / 0.4 / 0.01/step]
2932*
Toner Density Control Level
Adjusts the toner density control threshold level.
[0 = Normal / 1 = Dark / 2 = Light / 3 = Darker / 4 = Lighter]
Use this SP when you want to adjust the image density.
2933*
ID Sensor Control Correction
Adjusts the ID sensor control coefficient. DFU
[0.5 to 3 / 1 / 0.1/step]
2934* ID Sensor PWM Setting
1 Display Displays the PWM of the ID Sensor LED.
3
Upper Limit Correction
Corrects the upper limit of the PWM for the ID sensor LED. DFU
[0 to 255 / 50 / 1/step]
2935
ID Sensor Initialization
Performs the ID sensor initial setting.
Press Execute on the touch panel to start. Perform this setting after
replacing or cleaning the ID sensor.
To Next Page
Loading...
