System SP Tables-4
SM Appendix 4-41 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
4571 Scanner: Color: Text/Photo
4572 Scanner: Color: Auto Color
5 MTF: 0(Off), 1-15 (On)
[0 to 15 / 8 / 1 /step]
0: MTF Off
When the CCD converts the original image to electrical signals, the contrast
is reduced due to the influence that adjacent white and black pixels have on
one another as a result of lens properties. Typically, you may see very
narrow width and spacing between black and white areas. MTF corrects this
problem and emphasizes image detail.
6 Smoothing
Selects the level of smoothing for originals that contain
dithered images.
[0 to 7 / 4 / 0 / step]
0: Default (Off)
7: Strongest
7 Brightness
Sets the overall brightness of the image.
[1 to 255/128/1]
1: Weakest
128: Default 255: Strongest
8 Contrast
Sets the overall contrast of the image.
[1 to 255/128/1]
1: Weakest
128: Default 255: Strongest
9 Ind. Dot Erase
Sets the level of independent dot erasure to improve the
appearance of background.
[0 to 7/0/1]
0: Default (Off)
7: Strongest
4580 Fax: Text/Chart
4581 Fax: Text
4582 Fax: Text/Photo
4583 Fax: Photo
To Next Page
Loading...
