System SP Tables-4
SM Appendix 4-43 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
4600
SBU Version
Displays the version number of the SBU.
4602 Scanner Memory Erase
1 Scanner Memory Access
Enables the read and write check for the
SBU registers.
2 Address Setting
Not used.
3 Data Set
4603
AGC Execution DFU
Executes the AGC.
1 HP Detection Enable
2 HP Detection Disable
4604
FGATE Open/Close
Opens or closes the FGATE signal. This SP automatically returns to the
default status (close) after exiting this SP.
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Note:
When the registration sensor goes ON, the BCU generates the FGATE
signal and sends it to the LD units.
As soon as the LD units receive the FGATE signal, they send a
feedback signal to the BCU.
SC230, SC231 if the FGATE signal fails to switch on or off.
4606 White Balance Target: R
4607 White Balance Target: G
To Next Page
Loading...
