System SP Tables-5
SM Appendix 4-71 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
5118 Disable Copying
Temporarily denies access to the machine. Japan Only
[0 to 1/1]
0: Release for normal operation
1: Prohibit access to machine
5120
Mode Clear Opt. Counter Removal
Do not change. Japan Only
[0 to 2/1]
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
5121
Counter Up Timing
Determines whether the optional key counter counts up at paper feed-in or at
paper exit. Japan Only
[0 to 1/1]
0: Feed count
1: No feed count
5126
F Size Original Setting
Selects the F-size original setting.
[0 to 2 / 0 / 1 /step]
0: 8.5" x 13" (Foolscap)
1: 8.25" x 13" (Folio)
2: 8" x 13" (F)
To Next Page
Loading...
