System SP Tables-5
D017/D018/D019/D020/D084/D085 4-74 SM Appendix
5169
CE Login
If you will change the printer bit switches, you must 'log in' to service mode
with this SP before you go into the printer SP mode.
[0 to 1/1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
5179*
Bypass Size Error
This SP determines whether a paper size error prompt appears when the
machine detects the wrong paper size for the job and jams during feed from the
bypass tray.
[0 to 1/0/1]
0: Off
1: On
5186
RK 4: Setting Japan Only
Enables or disables the prevention for RK4 (accounting device) disconnection.
If the RK4 is disconnected for 10 seconds when this SP is set to "1 (Enable)",
the machine automatically jams a sheet of paper and stops.
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5188
Copy NV Version DFU
5195
Limitless SW DFU
To Next Page
Loading...
