System SP Tables-5
D017/D018/D019/D020/D084/D085 4-140 SM Appendix
5907
Plug & Play Maker/Model Name
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
5908*
LCT Paper Size
Selects the paper size for the LCT. Use this SP after changing the paper size in
the optional LCT (i.e., after changing the side plate position for the LCT).
[0 to 1 / 1 / 1] North America
0: A4
1: LT
[0 to 1 / 0 / 1] Other Areas (Europe/Asia)
0: A4
1: LT
5913 Switchover Permission Time
Sets the length of time to elapse before allowing another application to take
control of the display when the application currently controlling the display is
not operating because a key has not been pressed.
[3 to 30/1 s]
5915*
Mechanical Counter Detection
Checks whether the mechanical counter inside the inner cover is connected
or not.
Display:
0: Not detected
1: Detected
2: Unknown
To Next Page
Loading...
