Ricoh D017 - Page 586

System SP Tables-6
SM Appendix 4-153 D017/D018/D019/D020/D084/D085
Appendix:
Service
Program
Mode
6132
Jogger Fence Fine Adj
This SP adjusts the distance between the jogger fences and the sides of the
stack on the finisher stapling tray in the Booklet Finisher B793. The adjustment
is done perpendicular to the direction of paper feed.
1 A3T (SEF)
[-1.5 to 1.5 / 0 / 1/step]
+ Value: Increases distance between jogger fences
and the sides of the stack.
- Value: Decreases the distance between the jogger
fences and the sides of the stack.
2 B4T (SEF)
3 A4T (SEF)
4 A4Y (LEF)
5 B5T (SEF)
6 B5Y (LEF)
7 DLT-T (SEF)
8 LG-T (SEF)
9 LT-T (SEF)
10 LT-Y (LEF)
11 12" x 18"
12 Other
6133
Staple Position Adjustment
Adjusts the staple position for each finisher (B408/B793/D372).
+ Value: Moves the staple position to the rear side.
- Value: Moves the staple position to the front side.
1 Finisher 1 (B408/B793) [-3.5 to 3.5 / 0 / 1/step]]
2 Finisher 2 (D372) [-2.0 to 2.0 / 0 / 1/step]]