System SP Tables-8
D017/D018/D019/D020/D084/D085 4-186 SM Appendix
8065
S:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for scan jobs only. The finishing
method is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8066
L:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs output from within the
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server
mode.
8067
O:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
Number of jobs started in Sort mode. When a stored copy
job is set for Sort and then stored on the document server,
the L: counter increments. (See SP8066 1)
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Booklet
Number of jobs started in Booklet mode. If the machine is
in staple mode, the Staple counter also increments.
806x 5 Z-Fold
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
806x 6 Punch
Number of jobs started in Punch mode. When Punch is set
for a print job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
To Next Page
Loading...
