Printer Service Tables
D017/D018/D019/D020/D084/D085 4-232 SM Appendix
bit 6
Method for determining the image
rotation for the edge to bind on.
Disable
Enable
Enable: the image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS: Pre-05S models
bit 7
Letterhead mode printing Disable
Enable
(Duplex)
Routes all pages through the duplex unit.
Disable: Simplex pages or the last page of an odd-paged duplex job, are
not routed through the duplex unit. This could result in problems with
letterhead/pre-printed pages.
Only affects pages specified as Letterhead paper.
1001 Bit Switch
006 bit Switch 6 0 1
bit 0
to 5
DFU -
-
bit 6
PDL Auto Detection timeout of jobs
submitted via USB or Parallel Port
(IEEE 1284)
0:Disable
(Immediately)
1:Enable
(10 seconds)
To be used if PDL auto- detection fails. A failure of PDL auto-detection
doesn’t necessarily mean that the job can’t be printed. This bit switch tells
the device whether to time-out immediately (default) upon failure or to
wait 10 seconds.
⇒
Rev. 01/25/2010
To Next Page
Loading...
