LCT (B391)
SM 2-22 D017/D018/D019/D020/D084/D085
1. Remove the strips of tape.
2. Set the copier [A] on the LCT [B].
When installing the copier, Be careful not to pinch the cable [C].
3. Remove the connector cover [A] (rivet screw x 1).
4. Connect the cable [B] to the copier, as shown.
5. Attach a securing bracket [C] to each side of the LCT, as shown (
x 1 each).
6. Re-install the connector cover.
To Next Page
Loading...
