Error Codes
SM 35 D361/D510
D361/D510
Fax Option
Type
3350/3351
Code Meaning Suggested Cause/Action
14-08
Data Send to SMTP
Server Failed (5XX)
Failed to access the SMTP server because the
transmission failed.
SMTP server operating incorrectly
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Software application error.
14-09
Authorization Failed for
Sending to SMTP Server
POP-Before-SMTP or SMTP authorization
failed.
Incorrect setting for file transfer
14-10 Addresses Exceeded
Number of broadcast addresses exceeded the limit
for the SMTP server.
14-11 Buffer Full
The send buffer is full so the transmission could
not be completed. Buffer is full due to using
Scan-to-Email while the buffer is being used send
mail at the same time.
14-12 Data Size Too Large
Transmission was cancelled because the detected
size of the file was too large.
14-13 Send Cancelled
Processing is interrupted because the user
pressed Stop.
14-21 SMIME Sending Error
Make sure the user certificate or device certificate
is registered correctly.
14-30 MCS File Creation Failed
Failed to create the MCS file because:
The number of files created with other
applications on the Document Server has
exceeded the limit.
HDD is full or not operating correctly.
Software error.
To Next Page
Loading...
