Error Codes
SM 41 D361/D510
D361/D510
Fax Option
Type
3350/3351
Code Meaning Suggested Cause/Action
22-00
Original length exceeded
the maximum scan
length
Divide the original into more than one page.
Check the resolution used for scanning. Lower
the scan resolution if possible.
Add optional page memory.
22-01
Memory overflow while
receiving
Wait for the files in the queue to be sent.
Delete unnecessary files from memory.
Transfer the substitute reception files to
another fax machine, if the machine's printer is
busy or out of order.
Add an optional SAF memory card or hard
disk.
22-02
Tx or rx job stalled due to
line disconnection at the
other end
The job started normally but did not finish
normally; data may or may not have been
received fully.
Restart the machine.
22-04
The machine cannot
store received data in the
SAF
Update the ROM
Replace the FCU.
22-05
No G3 parameter
confirmation answer
Defective FCU board or firmware.
23-00
Data read timeout during
construction
Restart the machine.
Replace the FCU
25-00
The machine software
resets itself after a fatal
transmission error
occurred
Update the ROM
Replace the FCU.
To Next Page
Loading...
