Ricoh D017 - Page 878

Service Program Tables
D361/D510 60 SM
1 Mode No. Function
106
G3-2 Switch
001 – 016 00 – 0F
Changes the bit switches for the protocol
settings of the optional G3 board.
See section 4.2 Bit Switches
107
G3-3 Switch
001 – 016 00 – 0F
Changes the bit switches for the protocol
settings of the optional G3 board.
See section 4.2 Bit Switches
108
G4 Internal Switch
001 – 032 00 – 1F Not used (Do not change the bit switches)
109
G4 Parameter Switch
001 – 016 00 – 0F Not used (Do not change the bit switches)
111
IP fax Switch
001 – 016 00 – 0F
Changes the bit switches for optional IP fax
parameters.
See section 4.2 Bit Switches