Bit Switches - 3
SM 127 D361/D510
D361/D510
Fax Option
Type
3350/3351
Communication Switch 18 (SP No. 1-104-025)
No Function Comments
0-4 Not used Do not change the settings.
5
IP-Fax dial-in routing selection
0: Off
1: On
1: Transfers received data to each IP-Fax dial-in
number.
The IP-Fax dial-in number is a 4 digit-number.
6
PSTN 2 dial-in routing
0: Off
1: On
Enables or disables the dial-in routing for PSTN 2
connection.
7
PSTN 3 dial-in routing
0: Off
1: On
Enables or disables the dial-in routing for PSTN 3
connection.
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
Communication Switch 1B (SP No. 1-104-028)
No Function Comments
0-7
Extension access code (0 to 7)
to turn V.8 protocol On/Off
0: On
1: Off
If the PABX does not support V.8/V.34 protocol
procedure, set this bit to "1" to disable V.8.
Example: If "0" is the PSTN access code, set bit 0
to 1. When the machine detects "0" as the first
dialed number, it automatically disables V.8
protocol. (Alternatively, if "3" is the PSTN access
code, set bit 3 to 1.)
To Next Page
Loading...
