Ricoh D037 - Page 682

System Service Mode
D037/D038/D040/D041 9-148 SM Appendix
Control: BW
002
Job End: Potential
Control: FC
*ENG
[0 to 2000 / 100 / 1 page/step]
003
Interrupt: Potential
Control: BW
*ENG
[0 to 2000 / 500 / 1 page/step]
004
Interrupt: Potential
Control: FC
*ENG
[0 to 2000 / 200 / 1 page/step]
[Refresh Mode] DFU
3516
While making prints with low coverage, the developer is agitated with less
toner consumption and the toner carrier attraction tends to increase. This may
cause low image density or poor transfer (white dots). To prevent this, the
coagulated toner or overcharged toner has to be consumed by performing the
refresh mode.
001 Dev. Motor Rotation: Display: Bk *ENG
002 Dev. Motor Rotation: Display: C *ENG
003 Dev. Motor Rotation: Display: M *ENG
004 Dev. Motor Rotation: Display: Y *ENG
[0 to 1000 / 0 / 0.1 m/step]
005 Rotation Threshold *ENG
[0 to 1000 / 0.1 / 1 m/step]
006 Pixel Coverage Sum: Bk *ENG
007 Pixel Coverage Sum: C *ENG
008 Pixel Coverage Sum: M *ENG
009 Pixel Coverage Sum: Y *ENG
010 Required Area: Bk *ENG
011 Required Area: C *ENG
012 Required Area: M *ENG
[0 to 65535 / 0 / 1 cm
2
/step]