Ricoh D037 - Page 695

System Service Mode
SM Appendix 9-161 D037/D038/D040/D041
Appendix:
SP Mode
Tables
NOTE:
If the toner collection bottle has been replaced before the machine detects
used toner near full when this setting is set to "0", the machine cannot detect
toner collection bottle near full. In that case, set SP3-902-017 to "1".
Day Thresh:NF *ENG
[1 to 30 / 10 / 1 day/step]
012
Sets the threshold days for the near-full display. The near-full of the toner
collection bottle is displayed after the toner collection full sensor has detected
the actuator in the toner collection bottle.
013 Total Collected Toner *ENG
Displays the total amount of the used
toner.
[0 to 999999999 / 1 / 1]
014 Full Detected Date *ENG
Displays the date of the full detection fot
the toner collection bottle.
[New PCU Detection]
3901
Turns new PCU detection on or off.
001 ON/OFF Setting *ENG
[0 or 1 / 1 / - ]
0: OFF, 1: ON
[Manual New Unit Set]
3902
Turns the new unit detection flag for each PM unit on or off.
The use of these counters is explained in the PM section and in the relevant
parts of section 3 (Replacement and Adjustment).
001 Development Unit: Bk *ENG
002 Development Unit: C *ENG
003 Development Unit: M *ENG
004 Development Unit: Y *ENG
[0 or 1 / 0 / - ]
0: OFF, 1: ON
005 Developer: Bk *ENG
[0 or 1 / 0 / - ]