Ricoh D037 - Page 740

System Service Mode
D037/D038/D040/D041 9-206 SM Appendix
G-C *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
003
Adjusts the Cyan correction value of the green signal in two-color mode.
G-Y *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
004
Adjusts the Yellow correction value of the green signal in two-color mode.
R-M *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
005
Adjusts the Magenta correction value of the red signal in two-color mode.
R-Y *ENG
[0 to 128 / 100 / 1 /step]
128: Darkest density
006
Adjusts the Yellow correction value of the red signal in two-color mode.
5618 [Color Mode Display Selection]
- *CTL
[0 or 1 / 1 / - ]
0: ACS, Color, Black & White, Two Color,
Single color
1: ACD, Full Color, Black & White
001
Selects the color selection display on the LCD.
 Memory Clear (SP5-801)
 The following tables list the items that are cleared. The serial number information,
meter charge setting and meter charge counters (SP8-581, 582, 583, 584, and 586)
are not cleared.
5792
[MCS Debug SW]
001 1 -
002 2 -