Ricoh G104 - Page 129

SERVICE MODE TABLE
SM 5-13 G104
Service
Tables
1004 019 Reverse: LS: CCW *EGB
1004 020 Reverse: RS: CCW *EGB
Adjusts the inverter motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 021 DEV / OPC [K]: LS: N2 *EGB
1004 022 DEV / OPC [K]: RS: N2 *EGB
Adjusts the black development and OPC
motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 023 DEV [CMY]: LS: N2 *EGB
1004 024 DEV [CMY]: RS: N2 *EGB
Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 025 OPC [CMY]: LS: N2 *EGB
1004 026 OPC [CMY]: RS: N2 *EGB
Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 027 Fusing: LS: N2 *EGB
1004 028 Fusing: RS: N2 *EGB
Adjusts the paper exit and fusing motor
speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 029 Trans. Belt: LS: N2 *EGB
1004 030 Trans. Belt: RS: N2 *EGB
Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 031 PFU: LS: Normal 2 *EGB
1004 032 PFU: RS: Normal 2 *EGB
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / -1.14 / 0.01%/step]
1004 033 Duplex: LS: Add: N2 *EGB
1004 034 Duplex: RS: Add: N2 *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 035 Duplex: LS: N2 *EGB
1004 036 Duplex: RS: N2 *EGB
Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 037 Reverse: LS: CW: N2 *EGB
1004 038 Reverse: RS: CW: N2 *EGB
Adjusts the inverter motor speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 039 Rever.: LS: CCW: N2 *EGB
1004 040 Rever.: RS: CCW: N2 *EGB
Adjusts the inverter motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 041 DEV / OPC [K]: LS: TC *EGB
Adjusts the black development and OPC
motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 042 DEV [CMY]: LS: TC *EGB Adjusts the color development motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 043 OPC [CMY]: LS: TC *EGB Adjusts the color OPC motor speed.
[-4.00 to 4.00 / -1.35 / 0.01%/step]
1004 044 Fusing: LS: Thick *EGB
Adjusts the paper exit and fusing motor
speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 045 Trans. Belt: LS: TC *EGB Adjusts the transfer belt motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 046 PFU: LS: Thick *EGB
Adjusts the speed of the feed motor in the
optional paper tray unit.
[-4.00 to 4.00 / -1.14 / 0.01%/step]
1004 047 Duplex: LS: Add: TC *EGB Adjusts the duplex motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
1004 048 Duplex: LS: Thick *EGB Adjusts the duplex motor speed.
[-4.00 to 4.00 / -0.36 / 0.01%/step]
1004 049 Reverse: LS: CW: TC *EGB Adjusts the inverter motor speed.
[-4.00 to 4.00 / 0.6 / 0.01%/step]
1004 050 Rever.: LS: CCW: TC *EGB Adjusts the inverter motor speed.
[-4.00 to 4.00 / 0.0 / 0.01%/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA