SERVICE MODE TABLE
G104 5-38 SM
2556
[Thick2: [FC]: LE] Transfer roller current and discharge plate voltage for the
leading edge area, thick paper 2, CMY toner
2556 003 Separation *EGB
2556 007 Transfer Roller2 *EGB
[0 to 400 / 100 / 5%/step]
2558
[Thick2: [FC]: TE] Transfer roller current and discharge plate voltage for the
trailing edge area, thick paper 2, CMY toner
2558 003 Separation *EGB
2558 007 Transfer Roller2 *EGB
[0 to 400 / 100 / 5%/step]
2601
[OHP: [K]] Transfer roller current and discharge plate voltage for the image
area, OHP, black toner
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2601 002 Transfer Roller2 *EGB Adjusts the transfer roller current.
[0 to 60 / 15.0 / 0.1 -µA/step]
2601 003 Separation *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2606
[OHP: [FC]] Transfer roller current and discharge plate voltage for the image
area, OHP, CMY toner
2606 005 Transfer Roller2 *EGB Adjusts the transfer roller current.
[0 to 60 / 15 / 0.1 -µA/step
2606 006 Separation *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2 / 0.1 -KV/step]
2621
[OHP: [K]: LE] Transfer roller current and discharge plate voltage for the
leading edge area, OHP, black toner
2621 002 Transfer Roller2 *EGB
2621 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
2622
[Switch Timing] Switch timing from leading edge to normal, OHP
(Paper Type, Edge) Paper Type -> OHP, LE: Leading Edge
2622 002 T. Roll 2: OHP: LE *EGB [0 to 200 / 10 / 1 mm/step]
2622 003 Separa.: OHP: LE *EGB [0 to 200 / 25 / 1 mm/step]
2623
[OHP: [K]: TE] Transfer roller current and discharge plate voltage for the trailing
edge area, OHP, black toner
2623 002 Transfer Roller2 *EGB
2623 003 Separation *EGB
[0 to 400 / 100 / 5%/step]
2624
[Switch Timing] Switch timing from normal to trailing edge, OHP
(Paper Type, Edge) Paper Type -> OHP, TE: Trailing Edge
2624 002 T. Roll 2: OHP: TE *EGB [0 to 200 / 10 / 1 mm/step]
2624 003 Separa.: OHP: TE *EGB [0 to 200 / 30 / 1 mm/step]
To Next Page
Loading...
