SERVICE MODE TABLE
SM 5-37 G104
Service
Tables
2528
[Thick: [FC]: TE] Transfer roller current and discharge plate voltage for the
trailing edge area, thick paper 1, CMY toner
Paper Side: 1st or 2nd
2528 003 Separation *EGB
2528 007 T. Roll 2: 1st *EGB
2528 012 T. Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
2531
[Thick2: [K]] Transfer roller current and discharge plate voltage for the image
area, thick paper 2, black toner
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2531 007 Transfer Roller 2 *EGB Adjusts the transfer roller current.
[0 to 60 / 7.5 / 0.1 -µA/step]
2531 008 Separation *EGB
Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2536
[Thick2: [FC]] Transfer roller current and discharge plate voltage for the image
area, thick paper 2, CMY toner
2536 013 Transfer Roller 2 *EGB Adjusts the transfer roller current.
[0 to 60 / 10.0 / 0.1 -µA/step]
2536 014 Separation *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2551
[Thick2: [K]: LE] Transfer roller current and discharge plate voltage for the
leading edge area, thick paper 2, black toner
2551 003 Separation *EGB
2551 007 Transfer Roller2 *EGB
[0 to 400 / 100 / 5%/step]
2552
[Switch Timing] Switch timing from leading edge to normal, thick paper 2
(Paper Type, Edge) Paper Type -> TC2: Thick 2, LE: Leading Edge
2552 002 T. Roll 2: TC2: LE *EGB [0 to 200 / 10 / 1 mm/step]
2552 003 Separa.: TC2: LE *EGB [0 to 200 / 30 / 1 mm/step]
2553
[Thick2: [K]: TE] Transfer roller current and discharge plate voltage for the
trailing edge area, thick paper 2, black toner
2553 003 Separation *EGB
2553 007 Transfer Roller2 *EGB
[0 to 400 / 100 / 5%/step]
2554
[Switch Timing] Switch timing from normal to trailing edge, thick paper 2
(Paper Type, Edge) Paper Type -> TC2: Thick 2, TE: Trailing Edge
2554 002 T. Roll 2: TC2: TE *EGB [0 to 200 / 10 / 1 mm/step]
2554 003 Separa.: TC2: TE *EGB [0 to 200 / 30 / 1 mm/step]
To Next Page
Loading...
