SERVICE MODE TABLE
G104 5-36 SM
2506
[Thick: [FC]] Transfer roller current and discharge plate voltage for the image
area, thick paper 1, CMY toner
Paper Side: 1st or 2
nd
2506 013 T. Roll 2: 1st *EGB Adjusts the transfer roller current.
[0 to 60 / 10.0 / 0.1 -µA/step]
2506 014 Separation: 1st *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2506 021 T. Roll 2: 2nd *EGB
[0 to 60 / 15.0 / 0.1 -µA/step]
2506 022 Separation: 2nd *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
2521
[Thick: [K]: LE] Transfer roller current and discharge plate voltage for the
leading edge area, thick paper 1, black toner
Paper Side: 1st or 2
nd
2521 003 Separation *EGB
2521 007 T. Roll 2: 1st *EGB
2521 012 T. Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
2522
[Switch Timing] Switch timing from leading edge to normal, thick paper 1
(Paper Type, Edge) Paper Type -> TC: Thick, LE: Leading Edge
2522 002 T. Roll 2: Thick: LE *EGB [0 to 200 / 10 / 1 mm/step]
2522 003 Separation: TC: LE *EGB [0 to 200 / 25 / 1 mm/step]
2523
[Thick: [K]: TE] Transfer roller current and discharge plate voltage for the
trailing edge area, thick paper 1, black toner
Paper Side: 1st or 2nd
2523 003 Separation *EGB
2523 007 T. Roll 2: 1st *EGB
2523 012 T. Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
2524
[Switch Timing] Switch timing from normal to trailing edge, thick paper 1
(Paper Type, Edge) Paper Type -> TC: Thick, TE: Trailing Edge
2524 002 T. Roll 2: Thick: TE *EGB [0 to 200 / 10 / 1 mm/step]
2524 003 Separation: TC: TE *EGB [0 to 200 / 30 / 1 mm/step]
2526
[Thick: [FC]: LE] Transfer roller current and discharge plate voltage for the
leading edge area, thick paper 1, CMY toner
Paper Side: 1st or 2nd
2526 003 Separation *EGB
2526 007 T. Roll 2: 1st *EGB
2526 012 T. Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
To Next Page
Loading...
