SERVICE MODE TABLE
SM 5-35 G104
Service
Tables
2453
[Normal2: [K]: TE] Transfer roller current and discharge plate voltage for the
trailing edge area, plain paper 2, black toner
Paper side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separation: Discharge plate (paper separation)
2453 003 Separation *EGB
2453 007 T. Roll 2: 1st *EGB
2453012 T. Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
2454
[Switch Timing] Switch timing from normal to trailing edge, plain paper 2
(Paper Type, Edge) Paper Type -> N: Normal, TE: Trailing Edge
2454 002 T. Roll 2: N2: TE *EGB [0 to 200 / 10 / 1 mm/step]
2454 003 Separation: N2: TE *EGB [0 to 200 / 30 / 1 mm/step]
2456
[Normal2:[FC]:LE] Transfer roller current and discharge plate voltage for the
leading edge area, plain paper 2, CMY toner
Paper Side: 1st or 2nd
2456 003 Separation *EGB
2456 007 T. Roll 2: 1st *EGB
2456 012 T. Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
2458
[Normal2:[FC]:TE] Transfer roller current and discharge plate voltage for the
trailing edge area, plain paper 2, CMY toner
Paper Side: 1st or 2nd
2458 003 Separation *EGB
2458 007 T. Roll 2: 1st *EGB
2458 012 T. Roll 2: 2nd *EGB
[0 to 400 / 100 / 5%/step]
2501
[Thick: [K]] Transfer roller current and discharge plate voltage for the image
area, thick paper 1, black toner
Paper Side: 1st or 2nd
Unit -> T.Roll2: Transfer roller, Separa.: Discharge plate (paper separation)
2501 007 T. Roll 2: 1st *EGB Adjusts the transfer roller current.
[0 to 60 / 7.5 / 0.1 -µA/step]
2501 008 Separation: 1st *EGB Adjusts the discharge plate voltage.
[0 to 4 / 2.0 / 0.1 -KV/step]
2501 012 T. Roll 2: 2nd *EGB
[0 to 60 / 7.5 / 0.1 -µA/step]
2501 013 Separation: 2nd *EGB [0 to 4 / 2.0 / 0.1 -KV/step]
To Next Page
Loading...
