EasyManua.ls Logo

Ricoh G104 - Page 359

Ricoh G104
601 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Call Conditions
SM 4-25 G160/G161
G160/G161
SC
[Level]
Symptom Possible Cause/Required Action
Boost lap code error
[0101]
[B]
The boot monitor and OS
program stored in the ROM
DIMM is checked. If the
check sum of the program is
incorrect, this SC code is
displayed.
Defective ROM DIMM
Defective controller
1. Replace the ROM DIMM.
2. Replace the controller.
ROMFS error
[0104]
[B]
All areas of the ROM DIMM
are checked. If the check
sum of all programs stored in
the ROM DIMM is incorrect,
this SC code is displayed.
Defective ROM DIMM
1. Replace the ROM DIMM.
829 Self-diagnostic Error: Optional RAM
Verification error (Slot 1)
[0401]
[B]
The data stored in the RAM
in Slot 1 does not match the
data when reading.
Not specified RAM DIMM installed
Defective RAM DIMM
1. Replace the RAM DIMM.
2. Replace the controller board.
Composition error (Slot 1)
[0402]
The result of checking the
composition data of the RAM
in Slot 1 on the controller is
incorrect.
Not specified RAM DIMM installed
Defective RAM DIMM
1. Replace the RAM DIMM.
2. Replace the controller board.
IEEE1394 interface error
851
[B]
The 1394 interface is
unusable.
Defective IEEE1394
Defective controller.
1. Replace the IEEE1394 interface board.
2. Replace the controller.
Wireless LAN or Bluetooth card not detected at starting communication
853
[B]
The wireless LAN or
Bluetooth card is not
detected before
Loose connection
1. Check the connection.
2. Insert the wireless LAN or Bluetooth
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA

Table of Contents

Related product manuals