Service Mode Table
G160/G161 5-128 SM
7801 [Memory/Version/PN] Memory Version and Part Number Display
7801 250 Memory/Version/PN *CTL
Displays the part number and version of all
ROMs in the machine.
[PM Counter Display] Preventive Maintenance Counter Display
(Sheets or Rotations (%), Unit, [Color]) Trans Belt Unit: Transfer Belt Unit
T. Roll 2: Transfer Roller 2, Waste Toner: Waste Toner Bottles
7803
Displays the PM counter for each unit.
7803 001 Paper *EGB
7803 002 S: PCU: [K] *EGB
7803 003 S: PCU: [M] *EGB
7803 004 S: PCU: [C] *EGB
7803 005 S: PCU: [Y] *EGB
7803 009 S: Transfer Belt Unit *EGB
7803 010 S: T. Roll 2 *EGB
7803 011 S: Fusing Unit *EGB
7803 012 S: By-pass *EGB
7803 013 S: Tray 1 *EGB
7803 014 S: Tray 2 *EGB
7803 015 S: Tray 3 *EGB
Displays the number of sheets printed for
each current maintenance unit. When a unit
is replaced, the machine automatically
detects that the new unit is installed. Then,
the current PM counter value is automatically
moved to the PM Counter - Previous
(SP7-906-1 to 10) and is reset to “0”.
The total number of sheets printed with the
last unit replaced can be checked with
SP7-906-1 to 10.
SP7-803-001: This shows the number of
pages printed.
[0 to 9999999 / 0 / 1 sheet/step]
7803 017 R: PCU: [K] *EGB
7803 018 R: PCU: [M] *EGB
7803 019 R: PCU: [C] *EGB
7803 020 R: PCU: [Y] *EGB
7803 025 R: Trans Belt Unit *EGB
7803 026 R: T. Roll 2 *EGB
7803 027 R: Fusing Unit *EGB
Displays the number of revolutions of motors
or clutches for each current maintenance unit.
[0 to 9999999 / 0 / 1 revolution/step]
When a unit is replaced, the machine
automatically detects that the new unit is
installed. Then, the current PM counter value
is automatically moved to the PM Counter -
Previous (SP7-906-11 to 20) and is reset to
“0”. The total number of revolutions made
with the last unit replaced can be checked
with SP7-906-11 to 20.
[0 to 9999999 / 0 / 1 rotation/step]
7803 033 Toner Supply: [K] *EGB Displays the number of sheets printed until
To Next Page
Loading...
