Service Mode Table
SM 5-129 G160/G161
G160/G161
7803 034 Toner Supply: [M] *EGB
7803 035 Toner Supply: [C] *EGB
7803 036 Toner Supply: [Y] *EGB
the waste toner bottle becomes full or toner
runs out.
[0 to 9999999 / 0 / 1 /step]
7803 037 R%: PCU: [K] *EGB
7803 038 R%: PCU: [M] *EGB
7803 039 R%: PCU: [C] *EGB
7803 040 R%: PCU: [Y] *EGB
7803 045 R%: Trans Belt Unit *EGB
7803 046 R%: T. Roll 2 *EGB
7803 047 R%: Fusing Unit *EGB
Displays the value given by the following
formula:
(Current revolution / Target revolution) 100,
where “Current revolution” is the current
value for the counter of the part, and “Target
revolution” is the values of SP7-803-17
through 27. This shows how much of the
unit’s expected lifetime has been used up.
The R% counter is based on rotations, not
prints. If the number of rotations reaches the
limit, the machine enters the end condition for
that unit. If the print count lifetime is reached
first, the machine also enters the end
condition, even though the R% counter is still
less than 100%.
[0 to 999 / 0 / 1 rotation%/step]
7803 050 PCU Life: [K] *EGB
7803 051 PCU Life: [Col] *EGB
Displays the PCU unit life.
[-999 to 999 / 100 / 1/step]
7803 052 reserved *EGB
7803 053 reserved *EGB
7803 054 TransBeltU.Life *EGB
Displays the transfer belt unit life.
[-999 to 999 / 100 / 1/step]
7803 055 T.Roll2 Life *EGB
Displays the paper transfer unit life.
[-999 to 999 / 100 / 1/step]
7803 056 FusingUnit Life *EGB
Displays the fusing unit life.
[-999 to 999 / 100 / 1/step]
[PM Counter Reset] Preventive Maintenance Counter Reset
(Sheets, Unit, [Color]) Trans Belt Unit: Transfer Belt Unit, T. Roll 2: Transfer
Roller 2, Waste Toner: Waste Toner Bottle, Toner: Toner Bottles
7804
Clears the PM counter for each unit.
7804 001 Paper
To Next Page
Loading...
