Service Mode Table
G160/G161 5-130 SM
7804 002 PCU: [K] -
7804 003 PCU: [M] -
7804 004 PCU: [C] -
7804 005 PCU: [Y] -
7804 009 Trans Belt Unit -
7804 010 Transfer Roller 2 -
7804 011 Fusing Unit -
7804 012 S: By-pass -
7804 013 S: Tray 1 -
7804 014 S: Tray 2 -
7804 015 S: Tray 3 -
7804 017 S: Toner: [K] -
7804 018 S: Toner: [M] -
7804 019 S: Toner: [C] -
7804 020 S: Toner: [Y] -
7804 021 Toner Supply: [K] -
7804 022 Toner Supply: [M] -
7804 023 Toner Supply: [C] -
7804 024 Toner Supply: [Y] -
7804 050 All
Clears the PM counter.
Press the Enter key after the machine asks
“Execute?”.
When a unit is replaced, the machine
automatically detects that the new unit is
installed. Then, the current PM counter value
is automatically moved to the PM
Counter-Previous (SP7-906-1 to 40) and is
reset to "0".
7806 [Procon Counter] Process Control Counter ([Color])
7806 001 [K] *EGB
7806 002 [Cl] *EGB
[0 to 2000 / 0 / 1/step]
[MUSIC Counter] ([Color])
7806 003 [K] *EGB
7806 004 [Cl] *EGB
Counts the paper printed after previous
MUSIC.
[0 to 999 / 0 / 1/step]
[P. Pattern Coun.] P. Sensor Pattern Counter ([Color])
7806 005 [K] *EGB
7806 006 [Cl] *EGB
[0 to 255 / 0 / 1/step]
[Low Resolution] Low Resolution Counter ([Color])
7806 007 Sheets: [K] *EGB
7806 008 Sheets: [M] *EGB
[0 to 255 / 0 / 1/step]
To Next Page
Loading...
