Development
G179 3-22 SM
3.6.3 DEVELOPER
1. PCDU ( PCDU (Photoconductor and Development Unit))
2. Open the PCDU. ( Drum)
3. Development roller ( Development Roller)
4. Joint bracket [A] ( x 2)
5. Development unit [B]
6. Tip out the old developer [C].
7. Turn drive gear [D] to ensure that no developer remains in the unit or on the developer
roller.
Dispose of the used developer in accordance with local regulations. Work
carefully to avoid scratching or nicking the development roller.
8. Clean the development roller with a dry cloth.
To Next Page
Loading...
