Updating the Firmware
G179 5-156 SM
5.27 UPDATING THE FIRMWARE
Never switch off the power while downloading. Switching off the power while the
new software is being downloaded can damage the boot files in the controller.
5.27.1 SETTING THE MACHINE IN FIRMWARE UPDATE MODE
1. Turn off the power switch.
2. Remove the SD card cover ( x 1).
3. Insert the SD card that contains the firmware in SD card slot 2.
4. Turn on the machine.
Preparing to start
Firmware update…
Wait about 60 sec. for the "Power" LED on the operation panel to light, and for the first
module selection to appear.
Program UpDate Menu P.01
Engine
5.27.2 REVIEWING THE MODULE STATUSES
With the machine in the firmware update mode, follow this procedure to review the status of
the firmware modules.
Program UpDate Menu P.01
Engine
1. Push "-" "." to display the part number of the first module.
ROM: G1795160A
NEW: G1795160A
To Next Page
Loading...
