Ricoh G179 - Paper Size Detection - Trays 1 and

Paper Feed
G179 6-36 SM
6.9.6 PAPER SIZE DETECTION – TRAYS 1 AND 2
There are four paper size switches [A] in tray 1 and tray 2. Switch 1 (right end) is for tray set
detection. The other three switches detect the paper size as shown in the table below. The
actuator [B] is moved by the end plate [C].
0: Pushed, 1: Not pushed
Models Switch Location
North America Europe/Asia SW4 SW3 SW2
DLT (A3) SEF*
1
A3 (DLT) SEF*
1
0 0 1
LG (B4) SEF*
2
B4 (LG) SEF*
2
0 0 0
A4 SEF A4 SEF 1 1 0
LT SEF LT SEF 1 1 1
B5 SEF B5 SEF 0 1 1
LT (A4) LEF*
3
A4 (LT) LEF*
3
1 0 0
Exe (B5) LEF*
4
B5 (Exe) LEF*
4
0 1 0
A5 LEF A5 LEF 1 0 1
 *1: The machine detects either DLT SEF or A3 SEF, depending on the setting of
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA