Input Check -1
SM 5-133 G179
Service
Tables
5.22 INPUT CHECK -1
5.22.1 MAIN MACHINE
When entering the Input Check mode, 8 digits display the result for a section. Each digit
corresponds to a different device as shown in the table.
Bit No. 7 6 5 4 3 2 1 0
Result
0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1
Input Check
Reading
5803
Description
0 1
001 Tray 1: P Size Sens See the table 1 following this table.
002 Tray 1: Tray Set Sens Set Not set
003 Tray 1: P Lift Sens Not upper limit Upper limit
004 Tray 1: P End Sens No paper Paper remaining
005 Tray 1: P Height Sens 1
006 Tray 1: P Height Sens 2
See the table 2 following this table.
007 Tray 2: P Size Sens See the table 1 following this table.
008 Tray 2: Tray Set Sens Set Not set
009 Tray 2: Paper Lift Sens Not upper limit Upper limit
010 Tray 2: Paper End Sens No paper Paper remaining
011 Tray 2: P Height Sens 1
012 Tray 2: P Height Sens 2
See the table 2 following this table.
013 Tray 1: Paper Feed Sens Paper detected No paper detected
To Next Page
Loading...
