Ricoh G179 - Bridge Unit (D386); Component Check; Installation Procedure

Bridge Unit (D386)
SM 1-13 G179
Installation
1.5 BRIDGE UNIT (D386)
1.5.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No. Description Q’ty
1 Bridge Unit 1
2 Knob screw 1
3 Long Knob Screw 1
4 Holder bracket 1
5 Guide 2
1.5.2 INSTALLATION PROCEDURE
 Unplug the machine power cord before starting the following procedure.
 If you will install the finisher unit (B408 or B805) on the machine, install it after
installing the bridge unit (D386).
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA