Fusing
SM 3-39 G179
Replacement
Adjustment
Installing a new web holder roller
The holder [A] has a one-way clutch. Make sure that the holder [A] is set at the front side.
Installing new web rollers
1. Install the web supply roller [A] first ( ). Make sure that the web sheet is under the
pin [B].
2. Install the web take up roller [C] ( ). Make sure that the printed number [D] is
outside the web take up roller.
3. Reinstall the rear gear bracket ( Web Holder Roller and Web Rollers).
4. Reinstall the front and rear gears and bushings ( Web Holder Roller and Web
Rollers).
5. Reinstall the rear gear bracket ( Web Holder Roller and Web Rollers).
To Next Page
Loading...
