Print Adjustments
G179 3-72 SM
SP No. Specification
By-pass: Thick 1 SP1-001-5
By-pass: Thick 2 SP1-001-6
Duplex: Plain SP1-001-7
Duplex: Thick 1 SP1-001-8
2. Check side-to-side registration [B] for each paper feed station, and adjust with the
following SP modes.
SP No. Specification
By-pass SP1-002-1
Tray 1 SP1-002-2
Tray 2 SP1-002-3
Tray 3 SP1-002-4
Tray 4 SP1-002-5
LCT SP1-002-6
Duplex SP1-002-7
0 ±4.0 mm
Blank Margin
If the leading edge/side-to-side registration cannot be adjusted within
specifications, adjust the leading/left side edge blank margin.
To Next Page
Loading...
