Fusing
G179 3-40 SM
6. Turn the rear gear [E] in the arrow direction to remove the slack in the web sheet.
7. Reinstall the front gear bracket [F] ( Web Holder Roller and Web Rollers).
8. Turn the coupling [G] in the arrow direction to remove the slack in the web sheet.
9. Reinstall the web unit.
10. If you install a new cleaning web, reset SP 7806-008 (press "Execute" on the operation
panel).
3.9.5 PRESSURE ROLLER CLEANING ROLLER
1. Fusing unit ( Fusing Unit)
2. Fusing exit guide [A] (lock x 2)
3. Fusing front upper cover [B] ( x 3)
4. Fusing rear upper cover [C] ( x 3)
5. Fusing outer guide [D] (front: x 1, rear: stepped screw x 1)
To Next Page
Loading...
