3000-Sheet Finisher (B805)
G179 1-18 SM
1.6.2 INSTALLATION PROCEDURE
Unplug the main machine power cord before starting the following procedure.
If this finisher is installed on the G179 printer, the following options must be installed before
installing this finisher.
Bridge Unit (D386)
Paper Feed Unit (D351) or LCT (D352)
1. Unpack the finisher and remove all tapes and packing materials from the finisher.
2. Open the front door, and then remove all tapes and packing materials from the inside
of the finisher.
To Next Page
Loading...
