Paper Feed
SM 3-33 G179
Replacement
Adjustment
6. Paper dust box [A]
7. Pull out the paper dust container [B].
8. Remove two screws [C].
This makes the paper guide [D] tilt a little bit. Now you can access the screw
[E].
9. Dust container rail [F] ( [E] x 1)
10. Sensor bracket [G] ( x 1)
You can only access the screw on the sensor bracket from the inside (paper
tray location) of the machine.
11. Registration sensor [H] ( x 1, hooks)
To Next Page
Loading...
