Ricoh G179 - Page 232

SP1-xxx: Feed-2
G179 5-16 SM
5.4 SP1-XXX: FEED-2
Motor Speed Adj.
1801*
Adjusts the speeds of each motor. Each step decreases or increases motor
speed in 0.05% increments
Regist: Registration motor, Feed: Feed motor,
Duplex: Duplex/By-pass motor, Inverter: Duplex inverter motor,
Exit: Paper exit motor, Bridge: Bridge unit drive motor,
OpcMot: Drum motor, TransferMot: Transfer/Development Motor,
FusingMot: Fusing motor,
DevPuddleMot: Development Paddle motor
001 Regist: 90: Thick 2
002 Regist: 154: Thick 1
003 Regist: 180: Plain
004 Regist: 230: Plain
005 Feed: 90: Thick 2
006 Feed: 154: Thick 1
[-2 to 2 / 0.4 / 0.05 %]
007 Feed: 180: Plain
008 Feed: 230: Plain
[-2 to 2 / -1 / 0.05 %]
009 Dup. CW: 90: Thick 2
010 Dup. CW: 154: Thick 1
[-4 to 4 / 0.4 / 0.1 %]
011 Dup. CW: 180: Plain
[-4 to 4 / 2.3 / 0.1 %]
012 Dup. CW: 230: Plain
013 Dup. CCW: 90: Thick 2
014 Dup. CCW: 154: Thick 1
[-4 to 4 / 0.4 / 0.1 %]
015 Dup. CCW: 180: Plain
[-4 to 4 / 2.3 / 0.1 %]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA