SP1-xxx: Feed-3
G179 5-22 SM
019 Wait Time: L: Thick 2
020 Wait Time: L: Thin
021 Wait Time: N: Plain
022 Wait Time: N: M-Thick
023 Wait Time: N: Thick 1
024 Wait Time: N: Thick 2
025 Wait Time: N: Thin
down mode is activated or not after the time
specified with these SPs has passed.
026 Temp.: Low: Plain
027 Temp.: Low: M Thick
028 Temp.: Low: Thick 1
029 Temp.: Low: Thick 2
030 Temp.: Low: Thin
031 Temp.: Norm: Plain
032 Temp.: Norm: M-Thick
033 Temp.: Norm: Thick 1
034 Temp.: Norm: Thick 2
035 Temp.: Norm: Thin
Adjusts the threshold temperature of the fusing
unit to enter the CPM down mode.
[100 to 200 / 120 / 1 deg]
If the temperature of the fusing unit is less than
the temperature specified with these SPs, the
machine changes the CPM (adjustable with
SP1916-36 to -45).
036 Low: Plain
Adjusts the CPM in the CPM down mode.
[20 to 45 / 45 / 5 cpm]
037 Low: M-Thick
Adjusts the CPM in the CPM down mode.
[20 to 45 / 45 / 5 cpm]
038 Low: Thick 1
Adjusts the CPM in the CPM down mode.
[5 to 25 / 25 / 5 cpm]
039 Low: Thick 2
Adjusts the CPM in the CPM down mode.
[5 to 15 / 15 / 5 cpm]
To Next Page
Loading...
