SP5-xxx: Mode-2
G179 5-54 SM
5.12 SP5-XXX: MODE-2
Memory Clear
5801
Resets NVRAM data to the default settings. Before executing any of these
SP codes, print an SMC Report.
001 All Clear Initializes items 2 to 15 below.
002 Engine Clear
Initializes all registration settings for the engine and
printer process settings.
003 SCS
Initializes default system settings, SCS (System
Control Service) settings, operation display
coordinates, and ROM update information.
004 IMH Memory Clear
Initializes the image file system.
(IMH: Image Memory Handler)
005 MCS
No SP modes are cleared.
(MCS: Memory Control Service)
008 Printer application
Initializes the printer defaults, programs registered,
the printer SP bit switches, and the printer CSS
counter.
010 GWWS/NFA
Deletes the Netfile (NFA) management files and
thumbnails, and initializes the Job login ID.
Netfiles: Jobs to be printed from the DeskTopBinder
software
011 NCS
Initializes the system defaults and interface settings
(IP addresses also), the SmartDeviceMonitor for
Admin settings, WebStatusMonitor settings, and the
TELNET settings.
(NCS: Network Control Service)
014 Clear DCS Setting Initializes the DCS (Delivery Control Service) settings.
To Next Page
Loading...
