Ricoh G179 - Page 275

SP5-xxx: Mode-3
SM 5-59 G179
Service
Tables
062 HTTP Proxy use
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
HTTP Proxy Host
063
This SP sets the address of the proxy server used for communication
between the RCG device and the gateway. Use this SP to set up or display
the customer proxy server address. The address is necessary to set up the
embedded RCG-N.
 The address display is limited to 128 characters. Characters beyond
the 128 character are ignored.
 This address is customer information and is not printed in the SMC
report.
HTTP Proxy Port Number
064
This SP sets the port number of the proxy server used for communication
between the embedded RCG-N and the gateway. This setting is necessary
to set up the embedded RCG-N.
 This port number is customer information and is not printed in the
SMC report.
HTTP Proxy User Name
065
This SP sets the HTTP proxy certification user name.
 The length of the name is limited to 31 characters. Any character
beyond the 31st character is ignored.
 This name is customer information and is not printed in the SMC
report.
HTTP Proxy Password
066
This SP sets the HTTP proxy certification password.
 The length of the password is limited to 31 characters. Any
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA